Housing for both Nikon D7100 & D7200, Nikon's topnotch DX-format SLR camera's. Compatible with new Optical YS Converter.
Strobe use: The MDX-D7100 is standard with a sync cord connector cap for water tightness. There are 2 options for use of (an) external strobe(s): 1) use (a) Fiber-Optic Cable (L-type) or 2) use a conventional sync cord or YS Converter/N.
Viewfinders: Equipped with the Optical Viewfinder 0.5x as standard. Other (optional) interchangeable viewfinders can be used. Compatible with both the VF180 1.2x and VF45 1.2x viewfinders
Ports can be replaced without opening the housing. Port lock can be now activated from outside the housing. The housing is also equipped with a ‘lens-lock release’ button which allows the lens to be replaced without opening the housing. The port lock can also be activated from inside like previous SEA&SEA housings.
Connecting cables: Equipped with two fiber-optic cable sockets. With the camera's built-in flash raised and fiber-optic cables fitted, external strobes can be triggered as ‘slave units’ by the built-in flash. Optional Sync Cord 2-pin Connector or Optional YS Converter / N 5-pin Connector is required.
Every detail of the housing is precision machined. The housing is protected by a highly corrosion resistant anodized coating. All edges have been polished carefully for perfection.
Controls all the Nikon D7100 & D7200 essential functions underwater (Bracketing button, preview button and function button are not operable from the housing). The multi selector (which is often used underwater) is the same design as the camera control and can be operated in the same way. AF areas and Focus points can be changed by depressing the selector. The multi selector control is located so that it is accessible with your hand on the grip.
The camera's built-in flash can be activated and deactivated from the housing. (When the accessory light-shielding plate is fixed, this function cannot be used).
HDMI: Equipped with Accessory Port which can be used for HDMI output.
Easy travel: The grip design has been significantly improved with the travelling diver in mind. The grips are mounted with threadless fixings to facilitate easy transportation, mounting and removal of the grips. The new design also alleviates corrosion build up around the fittings. All fixings are available as spare parts.
Tripod use: Fitted with a tripod socket on the centre underside of the housing.
The quick shoe makes the camera easy to install and remove from the housing.
Built-in leak sensor immediately alerts you to water ingress.
Tech diving: 100m / 330 ft makes the housing ideal for tech diving.
SEA&SEA'S own site [here]
How to buy an underwater DSLR camera system [here]
Construction: Body - corrosion-resistant aluminum alloy (machined). Grip - corrosion-resistant die-cast aluminum alloy
Depth rating: 100 m / 330 ft
Dimensions (WxHxD): 341 x 192 x 136mm / 13.4 x 7.6 x 5.4 inches
Weight: Approx. 2 700 g / 94.5 oz. (housing only)
top of page
28 999,00 krPris
bottom of page